9) If the diver operating the unit must be replaced or the cleaning operation
must be interrupted or terminated, disengage the pressure pump by
pushing the throttle lever in to the idle position and pushing the PTO
handle to the “OFF” position (See Figure 2.3).
Release the water pressure
in the hose(s) by squeezing the zero-thrust gun trigger to the open or “ON”
position (See Figure 5.3)
while under water
.
Revert back to step 3 of the
operating instructions when the diver or replacement is ready to continue
cleaning.
Although the CaviBlaster system is relatively safe to use when
submerged in water, the system generates a high-pressure (up to
7,000-psi [482 bar]) water stream, which can cause injury when
the zero-thrust gun is out of the water.
ALWAYS
keep the zero-
thrust gun submerged when the pressure pump is engaged.
Figure 5.1 – Engine Shut-Down and Throttle Control
Page - 21
CaviBlaster 2570-D Operations Manual
For more information please email [email protected] or call 1-(352)275-5319