Cavavin C-155WDZ-V4, Инструкция по эксплуатации

Страница: 25 / 35

25
Powerbar with Surge Protection
Most electrical appliances use a series of electric control boards to operate. These boards are
very susceptible to power surges and could be damaged or destroyed.
If the appliance is going to be used in an area or if your city / country is prone to power surges /
outages; it is suggested that you use a power surge protector for all electrical devices / appliances
you use. The surge protector that you select must have a surge block high enough to protect the
appliance it is connected to. If you have any questions regarding the type and size of surge
protector needed contact a licensed electrician in your area.
Reversing the door
IMPORTANT: Any parts that you remove from the wine cellar while reversing the door should be
kept for later use.
1. Open the glass door and remove the two lock screws holding the door shaft assembly to
the glass door. Be careful to hold the glass door firmly after removing the screws.
2. Pull down to remove the glass door and place it on a padded surface to prevent scratching
it.
3. Remove the two screws from the left door bottom and install them to the right door bottom.
4. Remove the right lower door hinge. And turn around 90° then install it at the designated
position on the left side. And install the door shaft assembly accordingly.
5. Remove the upper hinge cover and remove the four screws that are used to fix the upper
hinge to the cabinet top. Then remove the upper hinge and install it at the designated
position on the left side.
6. Set the glass door to the designated position and install the two lock screws to connect the
door shaft assembly with the glass door and tighten them before the door is levelled.
IMPORTANT: Check that the door opens and shuts correctly, without fouling, after you have
completed the door reversal process.