Cattron SCU32, Руководство пользователя

Страница: 5 / 20

5
SCU32
User Manual
9M02-8679-A001-EN
Version 3.0
1. Safety Instructions
1.1 Warning Symbols and Definitions
Warning against a hazardous situation
Warning against electrical voltage
DANGER Calls attention to a dangerous situation with high risk; severe injuries or death possible.
WARNING Calls attention to a situation with medium risk; severe injuries possible.
CAUTION Calls attention to a situation with low risk; injuries or damage to the device possible.
Note :
Calls attention to important information.
1.2 General Safety Information
Persons under the influence of drugs and/or alcohol and/or other medicine that impairs their reaction may not
assemble, disassemble, install, put into operation, repair, or operate the product.
All conversions and modifications of an installation/system must conform to the relevant safety requirements.
Work on the electrical equipment must be performed by qualified, authorized personnel only, and in accordance
with the relevant safety requirements.
In the event of malfunction and visible defects or irregularities, stop the product, switch it off, and switch off all
relevant master switches.
WARNING
Observe the statutory regulations and directives applicable for the intended purpose, e.g.:
•
Accident prevention regulations
•
Safety rules and directives
•
Standards
•
Generally applicable statutory and other binding regulations for accident prevention and
environmental protection and general safety and health requirements.
•
The user must instruct his personnel accordingly.
•
Keep the User Manual permanently accessible at the product’s place of use.
•
Personnel assigned to work on/with the product must first read and understand this Operating Manual and
the safety instructions.
•
The safety instructions must, if necessary, be supplemented by the user with instructions concerning the
work organization, work sequences, user personnel, etc.
•
Only trained personnel may perform the work (maintenance and repair) on/with the product.
•
It is the user’s responsibility to ensure that the product always operates in a perfect condition and that all
applicable safety requirements and regulations are being observed.
•
Product modifications may not be carried out without the consent of the manufacturer.
!
!