Cattron Messenger W, Руководство пользователя

Страница: 7 / 19

Messenger W
User Manual
7
9M02-7000-A001-EN
Version A
2 Installation and Setup
This section provides information on installing the Messenger W and confirming its initial operation.
WARNING
IT IS RECOMMENDED THAT YOU READ THIS ENTIRE SECTION BEFORE STARTING THE
INSTALLATION.
2.1 Installation Steps
Installation consists of the following steps:
1. Unpack the Equipment.
2. Mount the Equipment.
The Messenger W should be mounted in a vertical position to try and minimize the chance of water
entering through the antenna connection. The antenna wire should have a service loop just below the
antenna connector.
3. Connect Main Power.
4. Connect Field Signals (digital, analog, Modbus) to the appropriate wire. Wiring information can be found
in Figure 2 and Figure 3 in the Diagrams section.
2.2 Unpacking the Equipment
The Messenger W is shipped with the following:
• The Messenger W electronics in a Deutsch thermoplastic enclosure or a board-only product
• A Cellular antenna (magnetic mount or bulkhead)
•
User Manual
• Optionally, a cable harness
2.3 Mounting the Equipment
The Messenger W is available in an automotive grade weather resistant enclosure; the dimensions of the
enclosure are shown in Figure 1 .
CAUTION
MOUNT THE MESSENGER W VERTICALLY AND PROVIDE A SERVICE LOOP FOR THE
ANTENNA CABLE TO PREVENT WATER INTRUSION.
!
!