Cattron CANplus CP750-E, Руководство по установке

Страница: 9 / 16

CANplus
TM
CP750-E
Installation Manual
9M02-1000-A501-EN
Revision A
3.1 D21 to Engine Pin out
This connector contains the typical connections required for electronically or mechanically
governed engines.
The following is the pinout:
Pin Signal Comment Pin Signal Comment
A Pre-Heat
1 A @
System Voltage
M Aux IN 2 Active Low
B B+ N Temp SW
Active Low,
Normally Open
C Sender Return P Oil PSI Sender
System Voltage
0 – 750 Ω
D Starter
10 A @
System Voltage
R --- ---
E GND S Pulse2 Tach System Voltage
F CAN Shield T Oil PSI SW
Active Low,
Normally Closed
G ECU/Solenoid
10 A @
System Voltage
U CAN Low
H Temp Sender
System Voltage
0 – 750 Ω
V CAN High
J Ignition
1 A @
System Voltage
W Aux IN 1 Active Low
K Pulse Tach System Voltage X
Fuel Level
Sender
System Voltage
0 – 750 Ω
L --- --- --- --- ---