-3-
Fit the feet (16) to the base tube (9). Fix in
place with two M4*6 screws (20). Left and
right side are the same.
Put the axle (17) through the two holes In
the base tube as shown. Attach the wheels
(18) to the axle.
Insert the R pin (21) through the holes in
the ends of the axle to lock the wheels.
Press the wheelcaps (19) onto the wheels.
Insert the upper tube (7) to the base tube
(9) Insert the M6 ×30 screws (22) from the
outside through the holes in the two tubes.
Then Tighten up with the M6 knurled nuts
and washers provided.
Installation instructions
e
