NVE9100 User Manual
3 Web Control
3.1 Log In
User can configure the device via Internet. Take the follow steps to log in before
using web UI control:
(1)
Prepare a PC with web browser.
(2)
Connect PC and the device through network interface.
(3)
Make sure that the IP address of the device and PC are in the same network
segment:
Click
, then click
, and input “CMD” in the textbox.
Click
, it will display the following window:
Input “ipconfig”, and press the “Enter” Key:
Confirm the IP address of the device through the front panel:
Tips: IE 8.0 or Firefox6.0 or higher version is recommended.
Tips: 202.0.0.100 is the local IP address of PC.
7
