NAE1000
User Manual
4 Web Control
4.1 Web browser configuration and log in
4.1.1 Web browser configuration
User can configure the device via Internet. Take the follow steps to log in before
using web UI control:
Prepare a PC with web browser.
Connect PC and the device through network interface.
Make sure that the IP address of the device and PC are in the same network
segment: Click
，
then click
，
In the
“open”the back
of the blank input “CMD”and Click
,then you will see:
Input
ipconfig
, click enter, you will see:
Tips
：
202.0.0.134 is the local IP address of the PC.
Confirm the device’s IP address via front panel, as shown in figure 4.1 :
8
