18
OPERATING YOUR SB 810 BLENDER
OPERATING YOUR SB 810 BLENDER
BEFORE FIRST USE
Before fi rst use, remove all packaging
and advertising labels / stickers from the
appliance. Be sure to remove all accessories
from the package material.
Wipe the blender parts with a soft sponge
slightly moistened in warm water. Dry with
a clean cloth. Never immerse these parts in
water or wash them in the dishwasher.
Blender parts to be wiped only with
a sponge:
– Motor
unit
– Stick
attachment
– Storage
box
– Chopper
lid
– Vacuum
attachment
– Adapters
Wash the parts of the blender listed below in
warm water with a small amount of washing-
up liquid.
Rinse in clean water and wipe dry. Blender
parts to be washed in water:
– Multifunction cutting knife
– Grinding
blade
– Whipping
blade
– Blade
remover
– Chopping
blade
– Chopping bowl with an anti-slip mat
– Mayonnaise preparation attachment
– Whisk
– Cleaning
brush
WARNING!
ALWAYS BE
CAREFUL WHEN
HANDLING THE
BLADES. THE BLADES
ARE VERY SHARP.
MISHANDLING MAY
LEAD TO SERIOUS
INJURIES.
NOTE
No part of your blender is suitable for
dishwasher use.
USING
1. Assemble your blender according
to the intended purpose of use
- see chapter “
ASSEMBLY AND
DISASSEMBLY OF YOUR BLENDER
SB 810
” for more information.
2. Always make sure that the surface on
which the food container to be processed
is placed is fl at, stable and clean.
3. Turn the control knob to set the required
food processing speed. You can also
change the speed during operation. You
can set the speed from "1" (lowest) to "5"
(highest).
4. Press the switch to start the blender. It
is necessary to keep the switch pressed
throughout the food processing. When
the switch is released, the blender will
power off automatically.
5. If you need to check the condition of
the processed food, release the switch
and wait until the blender has stopped
