Catler FG 403 Скачать руководство пользователя страница 7

7

CATLER RECOMMENDS SAFETY FIRST

•  This appliance is designed for home use only. This appliance is not designed for 

commercial use. Do not use this appliance in moving vehicles or on boats, outdoors, or for 

any purpose other than it’s intended. Otherwise, there is a risk of personal injury.

•  Before connecting this appliance to a power socket, make sure the voltage stated on the 

product's rating label corresponds to the voltage in your power socket.

•  Place the appliance on a stable, heat-resistant, flat and dry surface away from the edge of 

the worktop.

•  Do not place the appliance on or near heat sources such as hotplates, ovens or gas 

burners. Vibrations during operation may cause the appliance to move.

•  Do not use this appliance with a programmable switch, timer switch or any other device 

that automatically switches the appliance on.

•  Before switching on the appliance, make sure it is correctly assembled. 

•  Do not attempt to grind bones, nutshells or other hard ingredients.

•  Do not leave the appliance running continuously under heavy load for more than 5 

minutes. Before turning it on again, allow it to cool down for at least 10 minutes.

•  Never use your fingers or other objects to push ingredients through the filling funnel. 

Always use the provided plunger.

•  If the ingredients inside the grinding chamber become clogged, use the reverse button to 

remove the clogged ingredients.

•  Never run the appliance without liquid. This may damage the lid.

•  Always switch off the appliance and disconnect it from the power supply when you have 

finished processing ingredients.

•  To prevent electric shock, do not immerse the appliance, the power cord or the power 

cord plug in water or other liquid.

•  Check the condition of the appliance regularly. Never use a damaged appliance or an 

appliance with a damaged accessory, power cord or plug.

•  Do not disconnect the appliance from the power socket by pulling on the power cord. This 

could damage the power cord or the power socket. Disconnect the cord from the power 

socket by gently pulling the plug of the power cord.

IMPORTANT SAFETY INSTRUCTIONS FOR USING ELECTRICAL EQUIPMENT

•  Fully unwind the power cord before use.

•  Do not leave the power cord hanging over the edge of a table or countertop or allow it 

to touch a hot surface or to become tangled up. Do not put heavy objects on the power 

cord.

•  For safety reasons, we recommend to connect the appliance in an independent electrical 

circuit separated from other appliances. Do not use adapter plugs or extension cords to 

connect the appliance to a power outlet.

•  To prevent electric shock, do not immerse the appliance, its base or the power cord in 

water or other liquids.

•  We recommend that you check your appliance regularly. Do not use the appliance if it is 

damaged in any way or if the power cord or plug is defective. All repairs or adjustments 

must be performed at the nearest Catler authorised service centre.

•  Any maintenance other than routine cleaning must be entrusted to an authorised Catler 

service centre.

Содержание FG 403























Отзывы: