Catler FD 4010, Инструкция по эксплуатации

Страница: 15 / 17

13
CARE AND CLEANING
CARE AND CLEANING
Before cleaning the appliance, always
disconnect the plug of the power cord from
the mains socket, unplug the power cord
terminal from the appliance rear socket and
let it to cool sufficiently.
WARNING!
DO NOT WASH THE
APPLIANCE, MAINS
CORD AND PLUG
UNDER RUNNING
WATER AND DO
NOT IMMERSE IT
IN WATER OR ANY
OTHER LIQUID.
CAUTION:
Do not use sharp objects, chemicals,
thinners, petrol or other similar
substances. Under no circumstances
should the appliance be cleaned with
a steam cleaner.
Wipe the dehydrator outer surface with a soft
sponge slightly moistened in warm water,
then wipe dry with a clean cloth.
Remove the grilles and tray and wash them
in warm water with a small amount of
washing-up liquid. Rinse in clean water and
wipe dry with a clean cloth.
STORAGE
Before storing, make sure that the appliance
is clean, dry and completely cooled down.
Store it in a well-ventilated dry place out of
reach of children and animals.
ERROR MESSAGES
If the following error messages appear on the
display during operation, please follow the
instructions in this table:
Error
message
Meaning Solution
E1 The door is
open.
Close the door
to restore the
dehydrator
operation.
E2 Temperature
sensor
malfunction.
Stop using the
dehydrator,
unplug the
power cord
from the mains
socket and call
your authorized
service centre.
WARNING!
Under no condition
should you repair
the dehydrator on
your own. There are
no user serviceable
parts inside.