Catler BM 8010, Инструкция по эксплуатации

Страница: 18 / 28

18
OPERATING YOUR BEVERAGE&TEA MAKER BM 8010
Temperature setting button Brewing time
Green tea / 75 °C 3 minutes
White tea / 85 °C 4 minutes
Oolong tea / 90 °C 5 minutes
Black tea / 95 °C 6 minutes
•
After the appropriate button is pressed,
one long beep sounds. The button stops
flashing, and it starts to glow white. The
START/STOP button still glows red. The
kettle automatically counts the time left
before the brewing process ends. The
end of brewing mode is signaled by
5 short beeps and one long beep. Open
the internal lid. Carefully remove the tea
strainer with the brewed tea, and then
close the lid again.
NOTE:
Thirty seconds after brewing mode
ends, another acoustic signal sounds
to remind you that it is necessary to
remove the strainer with the used tea.
Brewing mode can be ended
prematurely by pressing and holding the
temperature setting button, which lights
for about 2 seconds. The end of brewing
mode is signaled by 5 short beeps and
one long beep. After that, the kettle
automatically switches to “Keep Warm”
mode. If the water kettle is removed
from the stand during brewing mode,
the mode automatically ends, and the
control panel switches to “Read” mode.
“KEEP WARM” MODE
After brewing mode is over, the kettle
automatically switches to “Keep Warm”
mode to maintain the tea’s temperature for
30 minutes. In this mode, the temperature
setting button slowly blinks, and the START/
STOP button glows red. The manufacturer
sets the maintenance temperatures for each
temperature setting preset button as follows.
Temperature setting
button
Maintenance
temperature
Green tea / 75 °C 65 °C
White tea / 85 °C 70 °C
Oolong tea / 90 °C 80 °C
Black tea / 95 °C 80 °C
•
Keep Warm” mode automatically ends
after 30 minutes. The end of the mode
is signaled by 5 short beeps and 1 long
one. After that, the kettle automatically
switches to “Standby” mode. To save
energy, all the button lights go off.
•
If you remove the kettle from the stand
during “Keep Warm” mode, this will
interrupt the mode that keeps the tea
hot, but the timer will still count off the
time left until “Keep Warm” mode ends
without regard to whether the kettle
is on or off the stand. If the kettle is
returned to the stand while counting
the time left in “Keep Warm” mode,
the user can decide whether to have
the kettle continue maintaining the
temperature or not. The appropriate
temperature setting button slowly,
continuously blinks, and the START/
STOP button glows white. Pressing the
appropriate temperature setting button,
which is slowly blinking, confirms that
you want to continue maintaining the
temperature. The START/STOP button
glows red. The temperature sensor
detects a drop in water temperature and
the need to reheat it. If the kettle starts
to heat the water immediately after
reaching the maintenance temperature
again, 3 beeps sound. If you do not
press the appropriate button, the
kettle will not continue to maintain the