Average Speed
Trip Distance
Maximum
Heart Rate
Maximum Speed
Total Distance
Clock Time
(Current Speed)
Elapsed Time
Measurement screen map
Switching the lower display by
pushing MODE button.
Hold Down (2sec.)
Just Push
(2) Basic Operations
Start and stop measurement
Push S/S button and the unit will start measuring “Elapsed Time
T
M
“. At the same
time, calculation of “Trip Distance
D
ST
“ and “Average Speed
A
V
S
“ starts. The symbol
of
bpm
in the middle display flashes while measuring. Push S/S button again and the
unit stops measuring and calculation. "Current Speed
", "Heart Rate
", “Total
Distance
O
DO
“, “Maximum Heart Rate
M
X
P
“ and “Maximum Speed
M
X
S
“ continue to be
measured and displayed regardless of the start/stop.
Switching Functions
The upper display always shows "Current Speed
", and the middle display always shows "Heart Rate
".
In the lower display, the selected function is displayed. Push MODE Button to switch functions of the lower
display. The functions of the lower display are divided into the Main functions and Sub functions. Each Main
function has its corresponding Sub function. To go back to Main function, push MODE button. You can not switch
the Sub function to one another.
-6-
