HL-EL460RC Rear
RECHARGEABLE HEADLIGHT
1. Connect the light unit to your PC or a
commercial USB battery charger using
the USB cable. (Fig 1
1
-
2
)
The switch or the indicator on the
cradle lights up, and charging starts.
Indicator light: On Charging
Indicator light: Off Charging is completed
* When your PC is in sleep state, the
unit cannot be charged.
* We recommend using 500+mA
(USB2.0) USB battery charger.
2. After charging is completed, remove
the USB cable, and install the charge
jack cover.
* Charging and lighting times are ap-
proximate values, and will vary by
environmental and user conditions.
* The cartridge battery can be fast-
charged by using the optional charging
cradle (about 3 hours of charging time).
Use a 1A or higher USB charging
adapter when charging by the cradle.
Before using the light, please read this manual and
the attached “Lithium-ion Batteries” thoroughly, and
keep them for future reference.
HOW TO CHARGE
1
CAUTION!
• Before your trip, please make sure the light is fi rmly mount-
ed to the bracket, it lights up, and the light is not blocked by
baggage, etc.
• Do not press the switch of the light while riding.
• Do not place it within children’s reach.
• In preparation for unexpected battery shutoff, we recom-
mend you carry a spare cartridge battery and light.
• This product is water-resistant under normal daily use and
can be used in the rain. However, do not intentionally sub-
merge it in water.
• If the light unit or parts become dirty with mud, etc., clean
with a soft cloth which is moistened with mild soap. Never
apply paint thinner, benzine or alcohol; damage will result.
• Dispose of used cartridge batteries appropriately according
to local regulations.
Before Initial Use
This unit is shipped with a small charge to check the light.
Be sure to charge it before use, according to the instructions
“HOW TO CHARGE”.
1. Hold the saddle rail by the bracket and
tighten it with the screws. (Fig 2
1
)
CAUTION!: Do not tighten the screws
too hard.
It may cause damage.
2. Insert the light unit into the bracket
until it clicks, and adjust the beam
angle. (
2
)
To remove the light from the bracket,
pull it out backward while pressing
down on the release button. (
3
)
3. After the angle adjustment, lock the
lever of the bracket and fi rmly tighten
the angle adjustment screw. (
5
)
CAUTION!:
• Check the screw of the bracket peri-
odically to make sure it is tightened
fi rmly.
• Fix the bracket to saddle rail securely.
• Do not apply any excessive load or
impact to the bracket. It may cause
damage.
HOW TO MOUNT TO THE SADDLE
2
Standard
charging time
Approx.
6 h
(USB 2.0)
2
1
56 – 78
mm
ø
6 – 8
mm
LOCK
Cradle
USB cable
Charge jack
cover
To PC or USB
battery charger
Charging on the cradle
Cartridge battery
Indicator
Design Pat. Pending
Copyright© 2013 CATEYE Co., Ltd.
EL460RC-Rear 130612 4
Cartridge battery
RM-2 Bracket
USB cable
Light unit
Mounted view
Range to mount
Tightening torque
0.4 – 0.6 N.m
Bracket
Release button
Beam angle
adjustment
Tightening torque: 1.5 – 2.0 N.m
Saddle rail
4
5
4
mm
3
1
2
Manual
ENG
