E
10
Fig.20
Fig.21
Electrode Area
How to Use as a Heart Rate Monitor
When the wireless heart rate sensor is placed on your chest, the heart rate is
measured. Target zone training is available by setting the upper/lower heart rate
limit.
1. Wireless Heart Rate Sensor
The Wireless Heart Rate Sensor adopts the principals medical electrocardio-
graph, in a simplified and miniaturized form.
Medial electrocardiograph calculates heart rate through several electrodes at-
tached to the skin, by measuring the minute electrical activity of the heart. The
Cat Eye CC-HB100 Wireless Heart Rate Sensor measures heart rate through
two built-in electrodes placed on the chest. Those two electrodes perceive the
minute electrical activity of the heart while the transmitter sends the signal to the
main unit, enabling easy and accurate heart rate measurements. (Fig.18)
* Maximum transmitting distance: about 80 cm
2. Before Attaching
• The wireless heart rate sensor should be placed at the center of your chest.
The electrode belts must make skin contact.
• For best results, moisten the electrode areas or smear electrolytic cream
(which is utilized for electrocardiograph) before wearing.
• If skin irritation occurs, the Wireless Heart Rate Sensor can be worn over
lightweight underwear; in this case, always moisten the electrode areas.
3. Attaching Wireless Heart Rate Sensor
1. Adjust the length of the attachment belt to your lower chest (breast) size (Fig.
19). Make certain the belt is secure and comfortable.
2. Lock the belt with the hook in position. The electrode areas should be contact-
ing your skin closely (Fig. 20). If attaching it on underwear, carefully moisturize
electrode areas (Fig. 21).
Note: In cold or dry conditions, lightly moisturizing electrodes will correct any
Wireless Heart
Rate Sensor
Main Unit
Hook
Electrode Belt
Fig.19
Attachment Belt
Fig.18
