background image

4

AU

Telephone Helpline: 1300225960

7.  When the water has reached the set temperature the ‘Warm’ light illuminates and the water is ready 

to be dispensed.

Note: Once the water temperature drops 5-10ºC then the appliance will reheat 

the water.

Serving

1.  Place a suitable vessel beneath the tap.

2.  Pull the tap towards you to begin dispensing.

3.  Raise the tap handle to close the tap.

Emptying the Appliance

Drain the appliance by using the tap to empty.

Thermal Cut-Out Reset

This appliance is fitted with a Thermal Cut-Out safety feature. Should the temperature exceed safe levels 

the appliance will automatically cut power.

The Safety Cut-out switch is located on the underside of the appliance. To reset the appliance:

1.  Empty the appliance and allow to cool.

2.  Press the reset button until it clicks. 

WARNING: Ensure the appliance has cooled down and is empty before resetting 

the switch, as it may need to be tipped slightly to gain access to the switch.

3.  The appliance is now reset and can be used as normal.

Cleaning, Care & Maintenance

• 

Always turn off and disconnect the appliance from the power supply before cleaning.

•  Use soapy water and a damp cloth to clean the exterior of the appliance.

•  Dry thoroughly after cleaning.

Descaling

•  In hard water areas lime scale can build up within the appliance after prolonged use. A buildup of 

scale can reduce the efficiency of the appliance and cause damage to the element.

•  To descale the appliance follow the instructions provided with any suitable descaler.

Note: Always flush out the system thoroughly after descaling.

Caterlite recommend that this appliance is descaled every 3 months or more 

frequently in hard water areas.

J709-A_J722-A_A5_v2_20180327.indb   4

2018/3/27   17:33

Отзывы: