5
UK
Cleaning, Care & Maintenance
Note: Always switch off and disconnect the appliance from the power supply
before cleaning.
• Do not use any abrasive cleaning agents on the appliance. Use warm soapy water.
• Do not immerse the motor housing in water. Clean the exterior with a damp cloth.
• Always dry thoroughly after cleaning.
• A Caterlite agent or qualified technician should carry out repairs if required.
For ease of cleaning, disassemble the appliance:
• Unscrew the barrel cap.
Note: If the cap has been put on too tight, knock the corners of the cap with a
rubber mallet or similar instrument to loosen it.
• Remove the mincing barrel, plate, blade and feed screw as one unit. Gently tip the barrel to remove
the pieces one by one.
• Twist off the hopper tray.
• Remove meat from all components and wash in warm, soapy water.
• Dry thoroughly.
• Lubricate the parts with a little cooking oil before replacing for best performance.
Troubleshooting
If your Caterlite appliance develops a fault, please check the following table before making a call to the
Helpline
Fault
Probable Cause
Solution
The unit is not working
The unit is not switched on
Check the unit is plugged in correctly and
switched on
Plug and lead are damaged Call Caterlite agent or qualified technician
Fuse in the plug has blown
Replace the plug fuse
Power supply
Check power supply
Internal wiring fault
Call Caterlite agent or qualified technician
Minced meat does not exit
the appliance evenly
The barrel cap is on too
tight
Loosen the cap
The cutting plate is blocked Remove and clean the plate
The cutting blade is blunt
Replace the cutting blade
Appliance is overfilled
Follow instructions for clearing a jam
CB943_ML_A5_v4_20190924.indb 5
2019/9/24 17:36