688190-1-2-3 nl-en ma 2016
5
En
IMPORTAnT SAFETY InFORMATIOn
• Do not touch metal parts of the urn as they become hot during use.
• Be mindful of hot steam coming from the lid vents
• Do not leave electrical appliances unattended when in use
• Always put the urn on a clean, level surface that can withstand the weight of the urn - including water.
• Always switch off and disconnect the urn from the mains supply before cleaning or when not in use.
•
nEVER
attempt to move the urn when it is full of hot (or cold) water.
• Do not allow the urn to be immersed in liquid.
• Do not attempt to disassemble the urn – there are no user serviceable parts inside.
•
AlWAYS
disconnect from the mains supply and allow the water to cool completely before attempting to
clean or descale the urn.
•
nEVER OVERFIll THE URn
• Do not allow cold water to sit in the urn for more than 2 days as it could stagnate, which is very unhy-
gienic. Empty the water out completely and refill if the urn has been stood idle over the weekend.
• Your appliance must never be switched on through an external timer or any kind of separate remote
control system.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliances by a dedicated person who has been trained and qualified.
• Children should be supervised to ensure that they do not play with the appliance. .
DO nOT POSITIOn THE URn SO THAT THE TAP HAnGS OVER THE COUnTER EDGE. IT IS
nOT DESIGnED TO BE USED THIS WAY AnD COUlD lEAD TO SERIOUS SCAlDS SHOUlD
THE TAP BE SWITCHED On BY MISTAKE.
POWER SUPPlY
If the unit uses a mains supply, ensure that the plug is securely inserted into the mains socket and it is easily ac-
cessible.
Protect the power lead from sharp objects, excessive heat and damp or wet locations.
Check the power lead periodically, and replace if damaged.
Check that the voltage on the rating plate of your product corresponds with your local electricity supply which
must be A.C. (Alternating Current).
Any repairs should only be carried out by a fully qualified electrician or an authorised service agent.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
ElECTRIC CIRCUIT DIAGRAM
Содержание 688.190
Страница 6: ...688190 1 2 3 nl en ma 2016 6...
