688175 nl-en ma 2019
9
EN
Operate
1. Preheat the oven to the desired temperature.
2. Set the power switch to ON. The fan will start to turn.
3. Switch the light ON.
4. Set the timer. This can be done up to a maximum of 60 minutes. Then turn the thermostat to the desired
temperature. This can be done within the following temperature limits: 0-300ºC.
5. Once the oven is up to temperature, place the food on the chamotte bottoms.
6. Wait until the food is prepared. The timer indicates this by means of a sound.
7. Afterwards, also turn the thermostat back to 0, turn the lights OFF and turn the power switch OFF.
TROUBLESHOOTING
Problem
Possible causes
Solutions
The device switches itself off
The device reaches an unsafe
temperature.
First allow the appliance to cool
down completely, make sure the
ambient temperature does not
exceed 20-25ºC and restart the
food dryer.
The device does not start
The plug is not properly inserted
in the socket.
The thermostat is not set.
Make sure the device is
connected to a grounded
electrical outlet.
Set the temperature with the
thermostat.
There is a metallic noise during
use.
Something is wrong with the
parts.
Do not dismantle the device
yourself and contact your local
dealer / service technician first.
The drying result is not
satisfactory.
The thermostat or fan is
defective/does not work properly.
Contact your local dealer or
service technician to view the
thermostat or fan.
CLEANING AND MAINTENANCE:
Step 1: After usage, the device must first be switched off, after which you must remove the
plug from the socket. Always do this in the order described.
This could prevent short circuit or other possible dangers.
Step 2: Wait until the device has cooled down completely.
Step 3: Remove the parts such as the chamotte bases.
Step 4: Clean the inside of the device with a wet cloth and then dry it thoroughly.
Pay attention!
Do not rinse the device with water. (Don’t wash it underneath the water tap).
This could damage the device and lead to dangerous situations.
Never clean the device with a stainless steel brush. This causes scratches and damages the device.
Always store it inside and keep it dry.
According to Waste of Electrical and Electronic Equipment (WEEE) directive, WEEE should be
separately collected and treated. If at any time in future you need to dispose of this product please
do NOT dispose of this product with household waste. Please send this product to WEEE
collecting points where available.
