537100 G20NE
8
EN
G
LI
S
H
PRODUCT STRUCTURE/PARTS
Safety Guard
Upper Lid
Column Cover
Bowl Lift Handle
Bowl Support
Locating Pins
SS Bowl
Dough Hook
Wire Whip
Flat Beater
OPERATING INSTRUCTIONS
How to place the mixing bowl
The mixing bowl must first be installed (before the agitator). To install the mixing bowl, the bowl holder must
be in the lowest position. Use the lift-handle to put the holder in this position.
place the pin of the bowl in the holder of the machine and make sure that the bowl holders are placed on
the pins of the machine (these are located on the sides of the bowl holder).
How to place the mixing tools
To install an agitator, the bowl must be in the lowest position.
Place the agitator in the bowl, press it onto the shaft and turn it 1/4th clockwise into the shaft so that the pin
fits into the shaft slot. Now the agitator is properly installed and cannot fall off the pin. Always check this
carefully before proceeding.
Control Panel:
TIME
–
TIME
+
ON/OFF
1
2
3
