508025-125 ma en 2013.01
P
ro fes s i o n a l
S
u p p l i e s
*508.025 / 508.125
ELECTRIC PASTA COOKER -
MANUAL
2/2
3. INSTRUCTION FOR USE
Don’t place the machine near walls or partitions that are made of fl ameproof materials.
Fill the tank with water and put a drop of oil to preserve it from calcareous and for a best cooking.
It has a 3000W. heating element and a thermostat 30 – 120°C.
3.1 Power up
WARNING
! never use the equipment unless under supervision.
Turn the thermostat knob to the position desired , the controlled come “on”.
70/80°C to keep warm water
110/120°C to boil
Put the pasta inside the stainless steel wire gauzed baskets.
To switch off the machine, turn the knob back to “0”.
We recommend to change water frequently for a best cooking and to preserve the machine from calcareous.
4. CLEANING
WARNING:
During cleaning, do not wash the outside of the machine with direct or high-pressure jets of water.
Clean the equipment carefully at the end of work every evening.
Daily cleaning of the equipment guarantees perfect operation and long life.
Power down the equipment before cleaning it.
To empty the counter, the discharge pipe must be inserted and a container put in position.
Clean it with neutral detergent, don’t use abrasive or corrosive detergent.
To protect stainless steel you must remove calcareous and oil the counter with Vaseline oil.
IMPORTANT:
Due to salted water, even if the basket are made in stainless steel 18/10,
sometimes it’s possible to have some rust on welding.
We recommend to clean the baskets everyday to avoid this problem.
4.1 What to do after long period of inactivity
Carefully clean and dry the equipment as explained in the instructions and power down.
4.2 What to do in the event of failures
In the event of a failure, switch off the machine, disconnect the power and call customer service.
5 MAINTENANCE
All maintenance work must be done by qualifi ed personnel.
5.1 Access
To access all the electrical parts ( thermostats, connections, resistance, etc.), open the control panel.
The Manufacturer will accept no liability if the instructions in this booklet are not followed or if tampering by
unqualifi ed personnel is discovered.
