AVVERTENZE
WARNINGS
Important safety information
MADE IN ITALY
batteria
/ battery
LED
/ LED
alimentatore
/ power supply
dimmerazione
/ dimming
Li-iON - 3,7V - 4100 mAh
classe
class
classe di protezione
protection class
persone suggerite per il montaggio
people required for mounting
IP20
• Si consiglia l’utilizzo dei guanti in dotazione. Per la pulizia della superficie utilizzare un piumino rimuovi-polvere.
• Si prega di utilizzare solo l'alimentatore in dotazione o prese USB max 1,2A.
Importanti informazioni sulla sicurezza
• L’apparecchio è dotato di una batteria incorporata: non provare a sostituire la batteria per evitare di rovinare la batteria stessa e il dispositivo.
• Caricare la lampada solo con cavo e alimentatore inclusi o autorizzati. L’utilizzo di altri alimentatori potrebbe causare un incendio, shock elettrico
e/o danni all’apparecchio e all’alimentatore.
• Quando la ricarica è stata completata, disconnettere l’alimentatore sia dalla lampada che dalla presa. Non ricaricare l’apparecchio più di 10 ore.
• Un uso improprio della batteria può causare fiamme ed esplosioni. Non smontare, colpire, bruciare la batteria. Proteggere la batteria dagli urti.
• Non cortocircuitare la batteria per evitare fiamme ed esplosioni.
• Non posizionare la lampada in ambienti ad alta temperatura: il surriscaldamento potrebbe causare l’esplosione della batteria.
• Tenere l’apparecchio all’asciutto.
• Non cercare di riparare l’apparecchio: se l’apparecchio o una sua parte non funzionano correttamente, rivolgersi a un rivenditore autorizzato per
assistenza.
• We suggest you to use the gloves provided. We recommend using a feather duster to clean the surfaces.
• Please use only the plug driver supplied or a USB socket max 1,2A.
• The device is provided with a built-in battery: do not attempt to replace the battery yourself to avoid damaging the battery or the device.
• Charge the lamp only with the included or authorized cable and power adapter. Using other adapters may cause fire, electric shock and/or
damage the device and the adapter.
• After charging is complete, disconnect the adapter from both the lamp and the power outlet. Do not charge the device longer than 10 hours.
• Mishandling the battery may cause fire or explosion. Do not disassemble, hit, crush or burn the battery.
• Do not short cut the battery to avoid fire or explosion.
• Do not place the lamp in high-temperature environments as overheating may cause the explosion of the battery.
• Keep your device dry.
• Do not try to repair the device yourself. If any part of the device does not work properly contact any authorized reseller for assistance.
III
1 x 2,8W scheda LED 3,7V
input 110/240V
output 5V @1,2 A
touch
1 x 2,8W LED board 3,7V
input 110/240V
output 5V @1,2 A
touch
Содержание Giulietta BE T
Страница 2: ......