Cata UBIND60, Руководство пользователя, Страница: 3 / 10

2. Detection of small or non-magnetic items
3. Residual heat indicator
When the hob has been operating for some time,there will be some residual heat. The
letter “H” appears to warn you that it is too hot to touch the surface.
4. Auto shut down
Another safety feature of the induction hob is auto shutdown. This occurs whenever you
forget to switch off a cooking zone.
The default shutdown times are shown in the table below:
Power level
The heating zone shut down automatically after
1~3 8 hours
4~6 4 hours
7~9 2 hours
When the pan is removed from the cooking zone, it stops heating immediately and
switches itself off after the buzzer has sounded for one minute.
Warning:
Anyone who has been fitted with a heart pacemaker should consult a doctor before using
the induction hob. This hob complies with all current standards on electro-magnetic safety
and in keeping with the legal requirements 89/336/CE & Directives
Installation
1. Cut a hole in the worktop of the dimension shown in the diagram below. A minimum of
50 mm space should be left around the hole. The worktop should be at least 30 mm thick
and made of heat-resistant material.
As shown in Figure (1)
Figure (1)
2. It is essential that the induction hob is well ventilated and that the air intake and exit are
not blocked.
Make sure the hob is correctly installed as shown in Figure(2).
- 3 -
When a unsuitable size or non-magnetic pan (e.g. aluminium), or some other small item
(e.g. knife, fork, key) has been left on the hob, the hob goes automatically on to standby
a minute later.
i
n
i
m
m
c
5
c
5
i
n
i
m
m
c
5
i
n
i
m
m
6
5 cm
9
4 cm
Figure (1)