![Cata Rocook Скачать руководство пользователя страница 22](http://html.mh-extra.com/html/cata/rocook/rocook_instruction-manual-and-guarantee_2573443022.webp)
- To match the sensor with the ROCOOK turn
the temperature sensor on by pressing the ON
/ OFF button located on the sensor itself. The
sensor LED flashes in green until the ROCOOK
and sensor become linked with each other, at
that moment the LED will remain fixed (green,
orange or red depending on battery level) and
the Bluetooth LED will light in the display of
temperature. If it does not work because the
sensor’s battery is depleted, connect the sen-
sor cable to the USB jack and repeat it.
- In order to unlink the sensor in case you
want to use it with another ROCOOK, you
can press the ON / OFF button for more than
3 seconds which will turn it off and unlink it
from the first ROCOOK. The sensor LED will
be lit in red and ROCOOK Bluetooth indica-
tor will turn off.
Battery state during usage:
-During usage the sensor’s LED will always be
off as long as the battery is greater than 15%.
A quick press of the ON / OFF button has the
effect of reporting the battery level:
0-20% 20-50% 50-100%
Red between 0 and 20
Orange between 20 and 50
(minimum 4 hours’ usage)
Green between 50 and 100
(24 hours’ minimum usage)
- If during usage of the battery happens to
have a level lower than 15% the LED will
flash to indicate that you should charge it.
When the level becomes less than 2% the
sensor automatically shuts down.
Battery state during charging:
Less than 20% of battery: fixed red LED.
Battery between 20% and 90%: fixed orange
LED.
Battery above 90%: fixed green LED.
<20%
20-90%
>90%
To charge the sensor
The charging function will always be disabled as
long as the ON button is deactivated (turn off,
standby or s lock modes) in order to
obey the European standards ErP which limit the
standby consumption to <0.5W. Whenever the
key is turned ON, the charger will be enabled.
With the ROCOOK on connect the sensor to
the USB port with the USB charging cable ca-
ble and start charging the battery. If you press
the ON/OFF button the sensor will be decou-
pled with ROCOOK and it will display the Char
message until the charging is complete.
00:15
2
055
IM-rocook-EN.indd 22
8/7/16 11:40
Содержание Rocook
Страница 1: ...Instruction manual and guarantee IM rocook EN indd 1 8 7 16 11 40 ...
Страница 2: ...IM rocook EN indd 2 8 7 16 11 40 ...
Страница 4: ...IM rocook EN indd 4 8 7 16 11 40 ...
Страница 5: ...IM rocook EN indd 5 8 7 16 11 40 ...