Cata IBF 3128, Инструкции по установке, использованию и обслуживанию

Страница: 20 / 70

2. Place a suitable pan on the cooking zone that you wish to use.
To lock the controls
> Make sure the bottom of the pan and the surface
Touch the key lock control for 3 seconds. The timer indicato
「
will
Of the cooking zone are clean and dry.
show "Lo"
3. According to the heating zone where the pan is placed, select a To unlock the controls
relevant zone select key by pressing
"雷
" key (1).The symbol O . 1. Make sure the Induction hob is turned on
Selected will stay fully it.
2. Touch and hold the key lock control to
「
a while
4. Select the powe
「
level by pressing the "
"key(4).
回
'k顽0
「"器
3. You can now start using your Induction hob.
When the hob is in the lock mode, all the controls are disable
except OFF , you can always turn the hob off with the OFF control
5. The powe
「
level will start at 5.P
「
essing the "+"will count up the in an emergency, but you shall unlock the hob first in the next
powe
「
levels from 5 to 9 in numerical order.Pressing the "-"key will operation.
take the powe
「
straight from 9 to O
> If you don't choose a heat setting within 1 minute, the induction
. Using the timer
hob will automatically switch off. You will need to start again at step
1.
You can use the time
「
in two different ways:
> You can modify the heat setting at any time during cooking
> You can use it as a minute minder. In this case, the timer will not
、u -:::
turn any cooking zone off when the set time is up.
If the display flashes :=-一 、 alternately with the heat setting ·
> You can set 1t to turn one cooking zone off afte
「
the set time is up.
This means that:
> you have not placed a pan on the cor
「
ect cooking zone or,
> You can set the timer for up to 99 minutes.
> the pan you're using is not suitable for induction cooking o
「
,
Using the timer as a minute minder
> the pan is too small or not properly cent
「
ed on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking If you a
『
e not selecting any cooking zone
zone.
The display will automatically turn off afte
「
1 minutes if no suitable 1.Make sure the cooklop is turned on.
pan is placed on it.
Note: you can use the minute minder even if you're not selecting any
When you have finished cooking
cooking zone.
1. Touching the relevant zone select key (1) that you wish to switch 2.Touch the Timer k
off.
叩琶
I ".
The minder indicator will start
flashing and "1 O" will show m the timer display.
2. Press the "-"key will desrease the powe
「
to"O" level, or press 3. Set the time by touching the"-" o「"+" control of the timer.
the"+" and
Hint: > Touch the"-" or"+" control of the timer once to decrease or
"-" at the same time, the power level will desrease to O straight inc
「
ease by 1 minute.
away.
> Touch and hold the " -"or "+" control of the time
「
to decrease o
「
3. Beware of hot surfaces
"H" will show which cooking zone is hot to touch. It will disappea
「
when
increase by 1 O minutes.
> Touching the"-" and"+" together, the timer is cancelled, and
the timer indicator will turn off.
the surface has cooled down to a safe tempe
「
ature. It can also be 4. When the time is set, it will begin to count down immediately. The
used
display will show the remaining time .
as an energy saving function if you want to heat further pans, use the 5. Buzzer will bips for 30 seconds and the time
「
indicator will turn off
hotplate that is still hot.
when the setting time finished.
Actived the boost function
1. Select the heating zone by touching the zone select key (1}
2. Touching the boost control key6} " "the zone indicator show
"P." and the power reach Max.
Cancel the boost function
Setting the time
『
to turn one o
『
more cooking zones off
If the time
『
is set on one zone:
1. Select the
「
elevant cooking zone which is working by touching the
zone select key (1).
2. Press the Timer keym
"回
，
the timing indicator flashes, and
you can set the timer at this point.
1. Touching the relevant zone select key(1) that you wish to cancel. 3. Using the "+" and " -"buttons, you can realize the setting of timing
1a. Touching the "-"key(4) to cancel the Boost function, then the
from 1 to 99 minutes.
cooking zone will revert to level 9.
Hint: Touch the"-" or"+" control of the time
「
once will dec
「
ease or
1b. Touching"-" and "+"control togethe
「
at the same time . the
inc
「
ease by 1 minute.
cooking zone switch off and the boost function cancel automatically Touch and hold the "_" or "+"control of the timer will decrease or
> The function can work in any cooking zone.
inc
「
ease by 1 O minutes.
> The cooking zone returns to level 9 after 5 minutes.
Touching the " -" and "+" together, the timer is cancelled, and the
Safety mode (Child lock)
> You can lock the controls to prevent unintended use (for example
timer indicator will turn off.
4. When the time is set, it will begin to count down immediately. The
display will show the
「
emaining time and the timer indicator flash
for 5 seconds.
children accidentally turning the cooking zones on).
NOTE: The red dot next to power level indicator will illuminate
> When the controls are locked, all the controls except the OFF
6
沁
control a
「
e disabled.
indicating that zone is selected.
5. When cooking timer expi
「
es, the cor
「
esponding cooking zone will
be switch off automatically.
Other cooking zone will keep operating if they are tu
「
ned on
previously.