Installing the decor door
s
Screw mounting bracket (1) onto decor door using the
screws supplied (as show in figure 4).
s
Fit the correct side towards the hinges.
s
Ensure there is a 5mm clearance between
the underside of the worktop and upper edge (X) of the
decor
panel.
s
Screw the four adjusting pins (2) fully into the
appliance
door.
s
Position the decor door on the appliance
door, introduce the locating pins at top into the
slots in the mounting plate and open out
according to detail in figure 5 (about 9mm).
fig. 4
fig. 5
FF221 Fridge Freezer Manual.indd 8
28/4/09 17:00:44