Cata 08003405, Инструкция по эксплуатации и техническому обслуживанию

Страница: 6 / 14

- WARNING: Accessible parts will
become hot when in use. To avoid burns
and scalds children should be kept away.
Insert in the fixed wiring a mean for
disconnection f
「
om the supply mains
having a contact sepa
「
ation in all poles
that provide full disconnection under
overvoltage category Ill conditions, in
accordance with the wiring rules. The
plug or omnipolar switch must be easily
reached on the installed equipment.
This appliance is not intended to be used
via an external time
「
or a remote cont
「
ol
system.
The manufacturers decline any responsi­
bility in the event of non-compliance with
what is described above and the accident
prevention norms not being respected
and followed.
To avoid all risk, if the power cable
becomes damaged, it must only be
replaced by the manufacturer, by an
authorised service centre, or by a
qualified elect
『
ician.
OPERATING PRINCIPLE (Fig. 1)
It exploits the electromagnetic properties of most cooking vessels.
The coil (inducto
「)
which produces the electromagnetic field is
operated and controlled by the electronic circuit.
The heat is transmitted to food by the cooking vessel itself.
The cooking process takes place as desc
「
ibed below.
- loss of heat is minimum (high efficiency)
- the system stops automatically when the vessel is removed o
「
even just lifted f
「
om the hob
- the electronic circuit guarantees maximum flexibility and fine
adjustments.
(Fig.1)
1 Vessel
2 Induced cu
「「
ent
3 Magnetic field
4 Inductor
5 Elect
「
onic circuit
6 Power supply
Reference Description
A Zone select key
B Child lock key
C ON/OFF key
D Power/Timer slider regulating key
E Boost control key
F Timer key
Installation
All operations relative to installation (electric connection) should be
car
「
ied out by skilled personnel in conformity with the rules in force.
As for the specific instructions see part pertaining to installer.
Using your Induction Hob To
start cooking
1. Touch the ON/OFF control.
After power on, the buzzer beeps once,
all displays show “ – “, indicating that
the induction hob has entered the state
of standby mode.
2. Place a suitable pan on the cooking
zone that you wish to use.
• Make sure the bottom of the pan
and the surface Of the cooking zone
are clean and dry.
3. According to the heating zone where the pan is
placed, select a relevant zone select key by pressing
“ ” key (A).The symbol 0. selected will stay fully it.
4. Adjust heat setting by touching the slider regulating
key(D) control.
• If you don’t choose a heat setting within 1
minute, the Induction hob will
• You can modify the heat setting at any time
during cooking.