EN
23
Installation and connection
- Please observe the special installation instructions.
- The appliance is fitted with a plug and must only be connected to a properly installed earthed
socket.
- The mains voltage must correspond to the voltage specified on the rating plate.
- The socket must be installed and connecting cable must only be replaced by a qualified
electrician.If the plug is no longer to accessible following installation,an all-pole disconnecting
device must be present on the installation side with a contact gap of at lease 3mm.
-Adapters,multi-way strips and extension leads must not be used. Overloading can result in a
risk of fire.
- Insert in the fixed wiring a mean for disconnection from the supply mains having a contact
separation in all poles that provide full disconnection under overvoltage category III conditions,
in accordance with the wiring rules. The plug or omnipolar switch must be easily reached on
the installed equipment.
- This appliance is not intended to be used via an external timer or a remote control system.
Warning
: This is a Class I appliance and MUST be earthed.
This appliance is supplied with a 3 core mains cable coloured as follows:
• Brown = L or Live
• Blue = N or Neutral
• Green/Yellow = Earth
EMPLEE FUSIBLES DE 3 A
TOMA CON FUSIBLE
BIPOLAR CONMUTADA
K
U
R
U
E
(Azul)
(Marrón)
(Verde/Amarillo)
N
L
N
L
N
L
FUSE ON
Содержание MT 9011 PRO BK
