HDMI SWITCH SPLITTER 4
×
2
（
matrix
）
by Cat5
５
Please input next instruction in three seconds or the
”
Overtime instruction
”
will appear.
The input instruction should be right, or you will be rejected with the
“
wrong
instruction
”
If the input or output that you chose is not connected to devices or not in
power-on mode,
“
ineffective instruction
”
will inform you.
If your instruction is performed, you can see the instruction of
“
successful
operation
”
.
③
. Instruction input method
A. Selecting source device
Sequence number of output (A/B) + sequence number of the input
(1/2/3/4) +
“
Enter
”
For example: If you want display B to view source 3, then you can input
“
B3
“
and finish with
“
Enter
”
.
B. Turning off an output
C + Sequence number of the output that you want to turn off (A/B) +
“
Enter
”
For example: If you want to turn off output B, then you can input CB, and
finish with
“
Enter
”
.
C. Turning off the Switch Splitter:
OFF +
“
Enter
”
D. Turning on the Switch Splitter:
ON +
“
Enter
”
E. Inquiry:
QS +
“
Enter
”
This order enables you know which input and output are available and the
connections of input and output.
5.3 CONECTION DIAGRAM
