3
DIC-500
IP
⇄ASI Converter
Before starting ..
This manual is a guidebook with regard to the method of use and composition of the
IP⇄ASI Converter (Hereinafter “Device”). Before using this device, please be sure to read this manual
thoroughly. After unpacking the package, please check various components and, if you have any questions
or inquiries, please contact our agent from whom you have purchased the device or our company.
Safety Cautions (Please check without fail)
1. Cautions before installation of the product.
2. Cautions on product usage
Please pay special attention not to install the device in the following places to avoid potential
failure of the device.
•
A place directly exposed to sunlight or close to heating elements such as steam, heater,
stoves etc.
•
Bad ventilation, humid and dusty area.
※ When using assembled on the system rack, please use a rack designed to be well
ventilated as possible.
•
A place near to magnetizing equipments.
•
An unstable place where is vibrating or sloping.
•
A place near to strongly flammable substances such as alcohols, aerosol insecticide.
※ When cleaning this device, please lightly wipe out with a dry soft cloth applied with
poly-wax and then wipe out again with a dry cotton flannel for preservation.
Before connecting power cord, please check the voltage for sure.
After unpacking the package, please discard the vinyl pack. (Please keep it out of children’s
reach as it will be very dangerous if the child puts it on the head).
If products are dismantled for repair by an unauthorized person, you may not be eligible for
the maintenance and repair service. Hence, in case of failure of the products, please contact
the dealer from whom you have purchased the product or our company.
Please read carefully the users manual before using the product.
When inevitably dismantle or repair the defects, please perform the work very carefully as the
parts or components are very sensitive.
Please do not touch receptacles or power lines with wet hand for safety.
Please be noted that the power line must be accurately plugged into the receptacles.
Please do not wipe the products with substances containing alcohol such as thinner and
benzene etc.
Please do not touch the terminal exposed to the outside as possible.
Please operate the device in a well air-ventilating place.
Please do not dismantle or repair device randomly.
Please do not place heavy objects on the main body of the device.
Please do not move the device during operation.
Before unplugging the power cord, please pull out the power cord after shutting off the
power switch. In case of frequent unplugging and plugging the power during operation of the
device under the state that power switch is not shut off, abnormalities may be caused to the
device.
If smoke arises or strange odor smells from the main body during the operation of the device,
immediately lower the power switch and contact the dealer or our company for necessary
technical supports and maintenance.
Before Starting
