5
Doors reversal directions
Unplug the appliance from the power supply before
carrying out the following operations.
Remove the ventilation grill (D).
Unscrew the bottom hinge (E).
Remove the freezer door by releasing it from the mid-
dle hinge.
Unscrew the middle hinge (see last Fig.).
Remove the fridge door by releasing it from the top
hinge pin (A).
Remove the pin and the washer (A+B) from the top
hinge (C), then mount these on the opposite side.
Refit the fridge door.
Replace the middle hinge to the left hand side.
Replace the freezer door.
Screw down the bottom hinge (E) on the opposite side
by using the screws previously removed.
Detach the plug (F) from the ventilation grill (D) and in-
troduce it into the hole left free on the opposite side.
Re-assemble the ventilation grill.
Remove the handle(s), after having removed the screw
cover and refit it on the opposite side. The holes that
are not used must be masked with the plastic plugs
removed.
The doors can be aligned by adjusting both the mid-
dle and top hinges.
The middle hinge (H) can be adjusted horizontally,
with the help of a tool, after having slackened the two
screws.
The top hinge is adjusted by slackening the nut (A)
with a 10 mm spanner and then proceeding as shown
in Figure.
Fig. 2
Fig. 3
Fig. 4
Fig. 5
F
F
F
D
E
F
D618
C
B
A
D427
D405
H
D336
