Castolin Eutectic ArcWeld 484 P, Инструкция по эксплуатации

Страница: 20 / 55

21
5) Switch to adjust the wire speed start when turned ON and the trigger is pressed, the wire speed
mechanism will be half of the adjusted one in the potentiometer of the front panel. When the wire
touches de working piece and the arc is opened the speed automatically changes for the speed
adjusted in the front panel.
6) Euro-connector to connect the welding gun.
7) Manual advance / gas switch – when positioned in "manual advance" it allows feeding the wire without
having voltage in the gun. When positioned in "gas" it allows pre adjustment of the shielding gas flow.
8) Anti-stick potentiometer - allows adjusting the time in which the power source can still supply welding
current when the welding is interrupted. This resource prevents the wire from sticking in the weld
puddle.
9) Wire speed mechanism – 4 feed rollers for ArcWeld 484 P .
10) Socket to connect the command cable of the welding source.
11) Nipple to connect the quick connector of the shielding gas hose in the gas regulator.
12) Socket to connect the power cable of the welding power source.
13) Inlet wire nozzle.
4.2) Side console
14) Brake hub: to install the wire reel.
4.3) Back panel
1
2
3
4
5
6
ArcWeld 484 P
ArcWeld 484 P