Castolin Eutectic ArcWeld 420i, Техническое руководство

Страница: 4 / 19

1SAFETY
0446 924 001 GB
-4 -
© Eutectic AB2020
4 Personal safety equipment:
o
Always wear recommended personal safety equipment, such as safety glasses,
flame-proof clothing, safety gloves.
o
Do not wear loose--fitting items, such as scarves, bracelets, rings, etc., which
could become trapped or cause burns.
5 General precautions:
o
Make sure the return cable is connected securely.
o
Work on high voltage equipment may only be carried out by qualified
electricians.
o
Appropriate fire extinguishing equipment must be clearly marked and close at
hand.
o
Lubrication and maintenance must not be carried out on the equipment during
operation.
ELECTRIC SHOCK -Can kill

Do not touch live electrical parts or electrodes with bare skin, wet gloves or
wet clothing

Insulate yourself from work and ground.

Ensure your working position is safe.
ELECTRIC AND MAGNETIC FIELDS - Can be dangerous to health

Welders having pacemakers should consult their physician before welding.
EMF may interfere with some pacemakers.
 Exposure to EMF may have other health effects which are unknown.

Welders should use the following procedures to minimize exposure to EMF:
o
Route the electrode and work cables together on the same side of your
body. Secure them with tape when possible. Do not place your body
between the torch and work cables. Never coil the torch or work cable
around your body. Keep welding power source and cables as far away
from your body as possible
o
Connect the work cable to the workpiece as close as possible to the
area being welded.
FUMES AND GASES - Can be dangerous to health

Keep your head out of the fumes
 Use ventilation, extraction at the arc, or both, to take fumes and gases
away from your breathing zone and the general area
WARNING!
Wire feeders are intended to be used with power sources in MIG/MAG mode only.
If used in any other welding mode, such as MMA, the welding cable between wire
feeder and power source must be disconnected, or else the wire feeder becomes
live or energized
WARNING!
Arc welding and cutting can be injurious to yourself and others. Take precautions
when welding and cutting