Figure 3
Attach left back leg (part D) and
right back leg (part E) into the
seat (A)’s pre-drilled holes,
turning left back leg (part D)/right
back leg (part E) by hand as
shown in Figure 3.
Tighten left back leg (part
D)/right back leg (part E)’s by
Screw (1) with Phillips
screwdriver (not included) as
shown in figure 3.
Attach the front legs (Part C) to
the seat (A)’s pre-drilled holes.
Insert bolt (2), spring washers (4)
and flat washers (5) into
pre-drilled holes, tighten bolt (2)
by Allen wrench (6) as shown in
figure 3.
Figure 4
Close Velcro strip on the bottom of
seat (A).
Page 4
A
B
C
D
C
B
3
4 5
6
E
C
1
A
B
C
E
D
C
