CBW560 Series Cable Modem
Wireless Router
User’s Manual
1
1. Introduction
The CBW560 is a Voice over IP Wireless Residential Gateway integrated with
Cable Modem which allows you implement your VoIP phone call directly
through Cable Modem Broadband Network service with its built-in
PacketCable 1.5 and DOCSIS/EURODOCSIS 2.0 compliant specification.
Equipped with two standard phone ports, CBW560 series could easily provide
end-users low-cost, long-distance calling, faxing, and a host of advanced
service including CBW560-to-Phone, Phone-to-CBW560, and CBW560-to-
CBW560.
And with the integration of 4 ports switch and IEEE 802.11g wireless
functionality, the CBW560 series could also be used as a Wireless Cable
Modem Residential Gateway in your home or small office. The ability to route
data information into your broadband network could help you easily extend
your local network via wire or wireless.
The CBW560 is MGCP/SIP compliant and has been tested with most major
VoIP Softswitch vendors’ Call Management systems. And it also has voice
support that includes hardware based Quality of Service (QoS), voice
compression (popular voice CODECs G.711, G.729A, G.723.1, and so on),
echo cancellation, dynamic latency (jitter) buffers, silence suppression, and
comfort noise generator.
Features
z
Fully DOCSIS / EURODOCSIS 1.1/2.0 Compliant with Channel Bonding
and 2.0b
z
TurboQAM Performance Enhancements
z
SmartSpectrum Noise Immunity Technology
z
Propane Packet Accelerator
z
Super I/O Configuration
z
10/100 Fast Ethernet
z
USB2.0
z
IEEE802.11b/g with Detachable antennas
z
IEEE802.11n future supported
z
WPS (WiFi Security Setup) Supported
System Requirements
z
IBM Compatible, Macintosh or other workstation supports TCP/IP
protocol.
z
An Ethernet port supports 10Base-T/100Base-TX Ethernet connection or
USB-equipped PC.
z
Subscribed to a Cable Television company for Cable Modem services.