Indexing Toggle Switch
The Index Toggle is located on the top of the Clamp Frame.
When the Toggle is in the center position the Index Pins are
inactive. When the Toggle is in the left or right position, with
exception to the first cycle after switching, the machine will not
drill unless the left or right (depending if the switch is in the left
or right position) Index Pin is seated in a previously drilled
hole.
Motor Carriage
The Motor Carriage is the black frame that the Motor is
mounted to using the Spring Return Bolts and the Travel
Limiter Bolts. Do not adjust any of these settings without first
contacting Castle’s Technical Service Line.
Plunger Lock
The Plunger Lock is the mechanism that keeps the Bit Cover
from opening. It’s a simple hand operated, pull lock with a
brass head. If the Plunger seems resistant to being pulled out,
push against the cover with your hip a bit to relieve the pressure
on the pin.
14
