CASTLE CREATIONS ©
MAMBA XLX2 PRODUCT USE STATEMENTS
DOC010421-1
You can also adjust MOTOR TEMPERATURE CUTOFF (with Sensored Motors Only) in Castle Link. When this
setting is enabled, the controller will shut off if the motor reaches the specified temperature as indicated by its
internal temperature sensor.
We always recommend making small changes when gearing up.
During the optimization of your setup it is critical to check motor and ESC temperatures after making adjustment.
The heat limit threshold for Mamba XLX2 ESC is 200° F and Castle motors is 200° F.
We recommend the use of the data log as you progress with the feel and power of the vehicle. You will be able
to record real-time data such as motor RPM, battery current and voltage, ESC and motor temperature, throttle
input, and more.
Download and analyze the collected data via Castle Link and make adjustments to maximize both performance
and battery life.
Furthermore, we do not recommend using the same Castle Link settings from a previously installed Mamba XLX
version. Start from scratch. This is how you learn your car and what it can actually handle.
The AUX wire allows you to adjust a setting “on-the-fly” using an auxiliary channel on your receiver.
The AUX wire function is disabled by default and is programmable via Castle Link. Plug this wire into the auxiliary
(#3/#4) channel on your receiver.
You must connect the AUX wire to an open channel on your receiver even if you are not using the Auxiliary
function.
You must disconnect the AUX wire from your radio before connecting to Castle Link. Failure to do so may result
in damage to your Castle Link and/or computer.
Although Mamba XLX2 is waterproof, it is not intended for operation while completely submerged in liquid.
Always rinse the ESC and motor with clean water after exposure to corrosives or dirt.
While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle,
including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.
The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.
