Castle Creations MAMBA XLX2 Скачать руководство пользователя страница 1

CASTLE CREATIONS © 

MAMBA XLX2 PRODUCT USE STATEMENTS 

DOC010421-1 

D-WIND MOTORS, ESPECIALLY LARGER MOTORS (40MM X 80MM AND LONGER 
AND  56MM  DIAMETER  OR  LARGER)  AND  ANY  MOTOR  THAT  IS  2000KV  OR 
HIGHER,  ARE  NOT  CURRENTLY  SUITABLE  FOR  OPERATION  WITH  THE  MAMBA 
XLX2  OR  MAMBA  MONSTER  X8S.    RUNNING  THESE  MOTORS  CAN  RESULT  IN 
ABNORMAL OPERATION AND EVEN LEAD TO PREMATURE ESC AND/OR MOTOR 
FAILURE. A SOFTWARE UPDATE WILL BE RELEASED THAT WILL ALLOW THE USE 
OF THESE MOTORS. 

 

Individual transmitter signals for neutral, full throttle, and full brake vary.  

 

You must calibrate your Castle ESC so that it will operate effectively with your transmitter.  

 

Anytime the ESC is powered up with a new transmitter or with different throttle channel settings, it will need to 
be calibrated to the transmitter’s throttle settings.   

 

Additionally, we recommend that the ESC be calibrated after updating to new software via Castle Link.  
 

 

 

Applying voltages higher than 33.6V will cause irreparable damage to your Mamba XLX2 controller.  

 

8S HV LIPO PACKS CHARGED TO ABOVE 33.6V (4.2V/CELL) CANNOT NOT BE USED. 

 

 

 

The Mamba XLX2 is a high-performance controller; you must use high-discharge cells in your high-performance 
application to ensure vehicle performance.  

 

MINIMUM battery capacity is 5000mAh and MINIMUM of 50C continuous for general use; for extreme setups 
(speed/drag) we recommend a MINIMUM of 70C continuous, discharge LiPo batteries.  

 

If the batteries you are using contain input bullets you might consider upgrading to a direct wired pack as the 
bullets may not be able to handle the currents that the Mamba XLX2 ESC can push out.   

 

If you must disable low voltage cutoff to prevent the esc from shutting down then your batteries are insufficient 
for your application. 3.2v/cell is the lowest a LiPo battery should ever be discharged under load. Utilize the data 
logging capability of the ESC to verify your batteries are not dropping below the cutoff voltage. Exceeding a LiPo 
batteries capabilities can lead to a catastrophic failure of the battery and/or esc. Disable low voltage cutoff at 
your own discretion. 
 

We have tested these batteries/brands in extreme setups (see connector ratings minimum section to  

ensure your battery connectors are appropriate) and recommend them for the Mamba XLX2: 

SMC True Spec Extreme™ v2 150C 6400mah 

China Hobby™ CNHL GPLUS 6000mah  (white) 

Power Hobby Pro Lipo 100C 6000mah 

Turnigy Graphene Panther™ 75C  

 

Отзывы: