MAMBA XL X SPECIFICATIONS
Application
Guidelines
1:5th scale RC hobby vehicles weighing up to 30 lbs
Input Voltage
Range
Min: 3S LiPo, Max: 8S LiPo, 33.6V
BEC
Specifications Adjustable from 5V to 8.4V (20 A peak), default 5.5V
Waterproof
No
Sensors
No
Product Use
Statement
• Applying voltages higher than 33.6V will cause irreparable
damage to your controller, voiding the warranty.
• The Mamba XL X is a high-performance controller; you must
use high-discharge cells in your high-performance application
to ensure vehicle performance
(see Driver’s Ed Guide, “A Word
About Batteries”- page 4).
• The Mamba XL X requires the use of connectors designed
for high-powered electric systems
(see Driver’s Ed Guide,
“Connectors and Power Wiring”- page 6).
• The Mamba XL X is not intended for human or animal propulsion.
RECEIVER CONNECTIONS
RX Wire
Plug the RX wire into the throttle (#2) channel on your receiver.
AUX Wire
The AUX wire allows you to adjust a setting “on-the-fly” using
an auxiliary channel on your receiver. The AUX wire function is
disabled by default and is programmable via Castle Link. Plug
this wire into the auxiliary (#3/#4) channel on your receiver.
You MUST connect the AUX wire to an open channel on your
receiver even if you are not using the Auxiliary function.
ESC Fan Wire
This wire provides power to the fan on the ESC. It can be plugged
into any channel on the receiver. Note: it can also be connected
via a Y-harness to any channel if there are no open ports.
TRANSMITTER PROGRAMMING REFERENCE
AUDIBLE ALERT REFERENCE
• •
Start Fail
• –
Low Voltage Cutoff
– •
Over-Current
• • –
Radio Glitch
• – •
Over-Temperature
• – –
Excessive Load
– • •
AUX Wire Radio Glitch
– • –
BEC Over-Temperature
• • • •
Data Log Full Warning
Contact
Castle Creations, Inc.
540 North Rogers Road
Olathe, KS 66062
(913) 390-6939 (ext. #1 Support, #3 Sales)
Product Support: [email protected]
Sales: [email protected]
Website: www.castlecreations.com/mambaxlx
1.Brake/Reverse Type
3. Brake Amount
5. Motor Type
• With Reverse*
• 25%
• Brushless*
• Without Reverse
• 50%*
• Brushed Reversing
• Crawler Reverse
• 75%
• Brushed High Power
•
100%
2.Voltage Cutoff
• Auto-Lipo*
4. Drag Brake
•
None
•
Disabled*
•
10%
•
20%
•
30%
•
Crawler
Full
On
*Default Setting
