OPERATION
LS-1700/LS-1700HD/TS-1700HD/LS-2000/LS-2000HD/TS-2000HD
(01–00)
5
6.
Return machine to the upright position.
7.
For easy power cord removal, pull and turn cord
hook upward (Figure 4).
FIG. 4
8.
Plug power cord into a grounded wall outlet
(Figure 5).
Grounded Outlet
Grounding
Edge/hole
Grounded
3 Hole Outlet
Ground Pin
(120V)
(230V/240V)
FIG. 5
FOR SAFETY: Do not operate machine unless
cord is properly grounded.
9.
Lower handle to desired operating height by
stepping down on handle release foot lever, seven
height settings (Figure 6).
FIG. 6
10. For Dual Speed machines, position dual speed
switch downward for scrubbing/stripping and
upward for spray buffing (Figure 7).
EMC MODEL
FIG. 7
MACHINE OPERATION
FOR SAFETY: Do not operate machine unless
operator manual is read and understood.
1.
Before operating, lift handle so machine is parallel
to floor (Figure 8).
FIG. 8
2.
To begin scrubbing, depress safety lock button
and pull triggers. Release safety lock button once
machine starts (Figure 9).
FIG. 9
ATTENTION: Use caution when starting out.
Machine will jolt when triggers are pulled.
