M e n u f u n c t i o n s
•
Display last sent status in idle
—
defines if the last sent status message is
shown on the display in idle mode.
Q
You can read and write text messages, and send them to
individuals and talk groups (network service). You can also
save messages in folders for later use. You can send text messages of up to
399 characters. Messages longer than 140 characters are formed with
concatenated messages, where the maximum number of individual
messages is three. However, in some languages the maximum length of
concatenated messages may be less than 399 characters depending on the
used alphabet.
Important:
Some networks may not support the text message character
counts indicated in this user guide. In such a network, text messages that are
over the allowed number of characters cannot be delivered, but they may be
deleted as a whole. Pay attention to the character count when you write
messages to be sent in such a network. Contact your service provider or
network operator for the details of your network.
Write text messages
1. Select
.
2. Write the message. For details, see Write text on page 63. You can also
insert a template into the message; select
, and select the desired template.
The number of characters left for the message and the message part
number are shown at the top right corner of the display.
3. When you finish writing the message, press
.
Note that if the receiving radio does not support text message
concatenation, the maximum length of the text message is 140 characters
to private numbers and 160 characters to phone and office extension
numbers.
To send the message as a flash message (network service), select
→
. The receiving terminal must
TMR880i_rel7.book Page 79 Mardi, 27. août 2013 11:00 11
