W r i t e t e x t
9. Write text
You can enter text, for example, when writing messages, in two different
ways. You can use traditional text input or predictive text input. Note that your
radio may not support predictive input. For more information, contact your
organisation.
When you are writing text,
on the top left of the display indicates
predictive text input, and
indicates traditional text input. The character
case is indicated by
,
, or
next to the text input indicator, and
you can change the character case by pressing
. The number mode is
indicated by
. To change to the number mode, press and hold
and
. To change back to the letter mode, press and hold
.
When writing text, select
to set predictive text input
on if it is available for the language. To change back to traditional text input,
select
. To temporarily change the writing language, select
Tip:
To quickly set predictive text input on or off when writing text,
press
.
To set a different language for writing text and for display texts, see Language
settings on page 88.
Q
Predictive text input
You can enter any letter with a single key press. Predictive text input is based
on a built-in dictionary to which you can also add new words.
1. Start writing a word by using the keys
-
. Press each key only
once for one letter. The word changes after each key press.
To insert a number while in the letter mode, press and hold the desired
number key. For more instructions, see Tips on page 64.
2. When you have finished writing the word and it is correct, confirm it by
pressing
or adding a space with
.
TMR880i_rel7.book Page 63 Mardi, 27. août 2013 11:00 11
