G r o u p c a l l s
•
—
allows you to change the scanning priority of the group to
.
Note that you need to have proper access rights to the above mentioned
functions. For more information, contact your organisation.
To rename the predefined user’s talk group folders, in the
folder,
scroll to the folder you want to rename, and select
You need access rights to rename a folder.
You can receive calls from background groups even when scanning or group
calls are switched off. These calls may also interrupt group calls in progress.
You may be able to respond to calls from background groups, but you cannot
start them.
To view the list of background groups, select
→
. To view information about the group, scroll to the name,
. If there is a backslash ( \ ) across the indicator in front of the
group name, the group is unavailable.
In this submenu, you can restore talk groups to their original settings.
and from the following:
•
—
to set the scanning priorities and scanning states of the
talk groups in the desired folder to the original values. If the folder is a
user’s own folder in My folders, the groups copied by the user are deleted
from the folder.
•
—
to set the scanning priorities and scanning states of
predefined dynamic groups to the original values, and to delete dynamic
groups that have been added over-the-air.
•
—
to set the scanning priorities and scanning states of
predefined talk groups in the user’s My folders to the original values, and to
delete the groups copied by the user.
TMR880i_rel7.book Page 42 Mardi, 27. août 2013 11:00 11
