EN
3. TRANSPORT, PACKAGING AND STORAGE
3.1 Inspection following transport
The check for damage and completeness must be carried out upon receipt of the package. If transport
damage is identified, refuse or accept the delivered product only with reservation*. A complaint detailing the
defects found must then be made. Damage can only be detected if the complaint is made within the specified
time limit, i.e. 24-48 hours maximum
*written on the carrier’s paper or digital delivery notes.
3.2 Packaging
The packaging of the appliance must be kept in case of moving or for return to the after-sales service. The
inner and outer packaging must be completely removed before using the unit. The environmental protection
regulations applicable in your country must be observed before the packaging is disposed of.
3.3. Storage
ATTENTION
The unit can only be stored in its original, closed packaging.
Storage can be carried out under these conditions :
• Storage in a dry and non-humid place
• Sheltered from the sun
• Stock control over 2 months (general condition of the device and all its components)
• No shaking of the equipment
• Storage in a closed room and not outside.
4. HARDWARE CHARACTERISTICS
* Subject to change without notice
Model
CMIX160
CMIX190
Electrical data
220 W / 220 V - 240 V
250 W / 220 V - 240 V
Speed
3000 – 13 000 Tr/min
3000 – 13 000 Tr/min
Total length
395 mm
425 mm
Tube length
160 mm
190 mm
Diameter
70 mm
70 mm
Net weight
0.990 Kg
1.2 Kg
Noise level
60 dB
60 dB
