Casotti AQUILOTTO FC8-2, Инструкция по установке и настройке

Страница: 4 / 9

6 7
HOW TO ADJUST AQUILOTTO
AQUILOTTO 2 SIDES requires some simple adjustments for proper
operation.
1)
Position the optical reader at approx. one meter from the nozzles in order
to discharge fluid approx. 10/15cm before the leaves.
The photocell reading system is like an invisible ray which is perfectly
straight in front of the photocell.
This ray can be oriented by moving the case, performing a reading earlier
or later.
If the optical reader is moved away from the nozzles, the reading is
performed earlier and therefore the distance between the fluid discharge
and the leaf increases.
If the optical reader is moved closer to the nozzles, the reading is
performed later and therefore the distance between the fluid discharge
and the leaf decreases.
Repeat the same adjustments installing the optical reader on the opposite
side.
2)
Turn the wheel of the 2 timers located on the control unit in the cab to delay
the solenoid valve closing.
This adjustment allows the fluid to continue flowing out for the desired time,
even if the photocell has ceased to detect leaves.
When AQUILOTTO is properly adjusted, the nozzle jet starts approx.
10/15cm before the leaves and stops approx. 10/15cm after the leaves,
ensuring that all leaves are treated with high accuracy.
WARNING:
in order to prevent damage to the timer, cut off power supply with the
relevant ON OFF main switch before operating selectors A – B – C.
Selector A (operating mode selector) must always be in D position.
Selector B (time unit selector) is normally set to seconds.
Selector C (full scale selector) is normally set between 0 and 12
(seconds).