Caso Entsafter „Whole Slow Juicer“ SJW 450
45
8.
Clean the juicing barrel with running water and a mild detergent. Open the closure of
juice flow. Clean the opening for residiuals and the juice flow carefully from alle
residuals.
Warning
► Do not use any hazardous chemicals to clean the appliance. It may change the color of
the appliance or result in a fire.
9. After cleaning, use a dry cloth to dry the appliance. Mount it and store it at a dry, safe
place.
17 Troubleshooting
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
17.1 Security advices
Attention
► Repairs of electrical appliances must be carried out by qualified personnel who are
trained by the manufacturer.
► Repairs performed by untrained persons may result in considerable hazards for the user
and damage the machine.
17.2 Troubleshooting
Problem
Solution
The device does not start.
•
Please check whether the power plug is properly plugged.
•
Please check whether the assembly is done according to
assembly methods.
The amount of juice is very
little and residues are still
damp.
•
Check whether stale food is used.
•
Food that was stored in the refrigerator for a long time
must be soaked in clear water for at least 10 minutes
before using them.
•
Different ingredients hold different amounts of fluid that will
yield different amounts of juice.
•
Check if all parts are assembled correctly.
•
If juicing ingredients with small seeds, after a few servings,
it may reduce the juice yield.For best result, disassemble
and wash the top-set (without motor block) in between
juicing.
•
If there is seed residue on the bottom of the strainer, this
can affect juicer performance and the overall juice yield.
Shutdown during use.
•
Check whether too much food is used.
•
Check whether the food contains hard cores.
•
When the juicer stops because there are too many
ingredients inserted in it, press the REV(II)-O-ON(I) button
in this order, switching back and forth 2-3 times.
