Casio YM-81, Руководство пользователя

Страница: 19 / 31

Installing the Wall Mount Bracket
EN-18
To connect an angled eyelet safety wire
1.
Pass the safety wire behind the anti-theft bar and then loop it as shown in the
illustration.
2.
Route the cable along the outside of the arm unit, and use an M4×10mm hex head
screw to secure the wire along with the adjuster unit to the screw hole at the
location on the top of the arm unit as shown in the illustration.
Bracket
Make sure that the angled eyelet of the safety wire is positioned as
shown in the illustration before securing it with the screw.
Arm unit
M4×10mm hex head screw
Inner arm
C