E-9
Getting Ready
7.
On the remote controller, press the [MENU] key to display the setup menu, and then
configure the settings below in the indicated sequence.
z
If the Projector System will be used in an inverted ceiling mount configuration, select “On” for the
“Screen Settings
3
Ceiling Mount” setting.
z
If the Projector System will be used in a rear projection (projecting from behind the screen)
configuration, select “Rear” for the “Screen Settings
3
Projection Mode” setting.
z
If the Projector System will be used in a location at an elevation of 1,500 to 2,000 meters, select
“On” for the “Option Settings 2
3
High Altitude” setting.
8.
Press the [
P
] (Power) key twice to turn off Projector A.
9.
Unplug the power cord of Projector A from the power outlet and plug in Projector B.
10.
Repeat the above steps 2 through 8 on Projector B.
11.
Plug the power cord of Projector A into the power outlet.
Setting Item
Setting
(1) Option Settings 1
3
Auto Keystone Correction
Off
(2) Screen Settings
3
Keystone Correction
0
(3) Screen Settings
3
No Signal Screen
Black
(4) Input Settings
3
Signal Name Indicator
Off
(5) Option Settings 1
3
Auto Power Off
Off
