page-3
Press any key.
9
Completion of this installation is implied.
0
The License Agreement screen is displayed.
폷
Click [Yes] to restart now.
폷
If [No] is chosen for planning to restart manually later, do not to forget to restart before moving on
to the next procedures.
2-2 After the setup program is completed
1
Start
All program
DLP Composer Lite
Then perform the Install DDP2000 USB Driver.
2
The screen shown below is displayed when performing [Install DDP2000 USB Driver]
3
The program boots up by pressing any key.
폷
The screen is terminated when completing.
폷
Press [OK] button in the case that the UsbUpd dialog is displayed.
4
Copy these files below to the file [ProgramFiles. DLP Composer Lite]
폷
bp_ddp1000.
projector
폷
DDP2000.projector
폷
FlashDeviceParameters.txt
2-3 Confirm that installation has been successfully completed.
Open the device manager in the control panel when connecting to the XJ-360 with the USB cable.
(After [3-2 Write the ROM] is completed)
Installation has been succeeded if the WinDriver and DDP2000 are placed in Jungo.
