— 2 —
2. OPERATION CHART: QW-2367
General Guide
·
Press
C
to change from mode to mode.
·
In any mode, press
B
to illuminate the display.
Alarm Mode
Stopwatch Mode
Timekeeping Mode
Telememo Mode
Hand Setting Mode
Day Counter Mode
Press
C
.
Timekeeping
Use the Timekeeping Mode to set and view the current time and date. You can
also display the Last Signal screen in the Timekeeping Mode.
·
The Last Signal screen alternates between the time and date that the time
calibration signal was successfully received.
Current Time Setting
Normally, you do not need to do anything to set the current time as long as you
are within an area in West Europe where the watch can pick up the time
calibration signal. You can also set the current time manually when you are
outside the range of the signal.
·
Before using the watch after purchasing it, use the procedure under
“Selecting Your Home City Code” to specify your Home City, and then use the
procedure under “To perform manual time calibration signal reception”.
·
Note that after you set your Home City code, you must also turn on the
watch’s time calibration signal receiver if you want to enable auto time
calibration. See “About Auto Receive” for more information.
·
See “Setting the Digital Time and Date Manually” for information about
manual settings.
·
The analog time of this watch is synchronized with the digital time. Because
of this, the analog time setting is automatically adjusted whenever you
change the digital setting. See “Analog Timekeeping” for more information.
Last Signal
Date
Time
Receive date
Receive time
Receive indicator
Press
D
.
Press
A
.
Month – Day
Day of week
PM indicator
Seconds
Hour : Minutes
3. When the setting you want to change is flashing, use
B
and/or
D
to
change it as described below.
Screen
l l l
l
l
l
l
l
l
Setting the Digital Time and Date Manually
Once you select a Home City code and set its time, you can view the current
time in other cities by simply changing the city code setting. Even if you plan to
use the watch without enabling auto time calibration, be sure to select a Home
City code (the city code whose time and date you are setting), before you set
the time and date.
To set the current digital time and date manually
1. In the Timekeeping Mode, hold down
A
until the
current Auto Receive On/Off setting (the receive
indicator) starts to flash, which indicates the setting
screen.
2. Press
C
to move the flashing in the sequence
shown below to select other settings.
Setting
Auto Receive
City Code
DST
12/24-Hour
format
Button Operations
Press
D
to toggle auto receive on and off.
Use
D
(+) and
B
(–) to change the
setting.
Press
D
to toggle between Daylight
Saving Time (ON) and standard time
(OFF).
·
Pressing
D
performs a different
operation when BER, LON, PAR, CAI, or
JRS is selected as Home City Code. See
“Auto Summer Time (DST) Switching”.
Press
D
to toggle between 12-hour (12H)
and 24-hour (24H) timekeeping.
Auto
Receive
Hour
12/24-Hour
Format
City Code
Seconds
DST
Day
Month
Year
Minutes
Sleep
Mode
4. Press
A
to exit the setting screen.
·
The Auto Receive setting is used for time calibration signal reception only.
See “About Auto Receive” for details.
·
See “City Code Table” at the back of this manual for a complete list of
available codes.
·
See details about the sleep mode.
·
Resetting the seconds to 00 while the current count is in the range of 30 to
59 causes the minutes to be increased by 1. In the range of 00 to 29, the
seconds are reset to 00 without changing the minutes.
Setting
Hour, Minutes
Seconds
Month, Day
Year
Sleep Mode
Button Operations
Use
D
(+) and
B
(–) to change the
setting.
Press
D
to reset the seconds to 00.
Use
D
(+) and
B
(–) to change the
setting.
Press
D
to toggle the sleep mode on
(On) and off (OF).
Screen
Selecting Your Home City Code
You can select a city code for your Home City (the city where you normally use
the watch). This data can be changed any time you move to another
geographic area.
·
See “City Code Table” at the back of this manual for a complete list of
available codes.
·
Once you select a Home City code and set its time, you can use World Time
to view the current time in any one of 28 cities (29 time zones) around the
world by simply specifying a city code.
To select your Home City code
1. In the Timekeeping Mode, hold down
A
until the
current Auto Receive On/Off setting (the receive
indicator) starts to flash, which indicates the setting
screen.
2. Press
C
to move the flashing to the City Code
setting.
3. Use
D
(+) and
B
(–) to change it.
4. Press
A
to exit the setting screen.
Time Calibration Signal Reception
This watch is designed to pick up a time calibration signal transmitted from
Mainflingen, Germany and update its time setting in accordance with the
signal. There are two different methods you can use to receive the signal: Auto
Receive and Manual Receive. With Auto Receive, the watch automatically
receives the calibration signal twice each day and makes appropriate
adjustments. With Manual Receive, you perform a specific button operation to
receive the calibration signal.
Note
·
If you are using the time calibration signal to set the time for this watch, be
sure to correctly set your Home City. Otherwise, there is the chance that the
watch will not set the correct time. See the “To select your Home City code”
for details.
·
Time calibration reception is limited to specific geographic areas in West
Europe.
·
The current time setting in accordance with the time calibration signal takes
priority over any time settings you make.
·
The watch is designed to automatically update the date and day of the week
for the period January 1, 2000 to December 31, 2039. Setting of the date by
the time calibration signal cannot be performed starting from January 1,
2040.
·
This watch can receive signals that differentiate between leap years and non-
leap years.
City code
l l l l
l
l
l
l
l
ll
l l
l l
·
Auto Receive is turned on when the watch is shipped from the factory.
·
See the information under “Time Calibration Signal Reception Precautions” if
you experience problems with time calibration signal reception.